– 4 –
Frequently asked questions
Question Cause & solution
Telephone
What should I do when:
– I hear static or sound cuts
in and out?
– there is interference from
other electrical units?
LPlace the handset and the base unit away from
other electrical appliances.
LMove closer to the base unit.
LYour unit is connected to a telephone line with
ADSL service. We recommend connecting a filter
(contact your ADSL service provider) to the
telephone line between the base unit and the
telephone line socket.
What do I need to do to
erase the missed call
number (for example,
“3 Calls”) from the
display?
LThere are unviewed missed calls remaining. View
them using the following method.
1 {j/OK}
2 {^}/{V}: “Caller List” i {>}
3 Press {V} to search from the most recent call,
or press {^} to search from the oldest call.
Call waiting (using the recall button)
Where can I find the recall
button?
How can I answer the 2nd
call when I am talking with
someone?
LThe recall button is shown as {R} on the handset.
Press {R} during a call.
LPress {R} key, and then {2} key while on the 1st
call, this will switch to the 2nd call, press {R} key
and then {2} again to alternate between calls or
return to 1st call, or press {R} key and then {1}
key to terminate the current call.
How can I make a
conference call?
To make an internal conference call:
LPress {INT} and the extension number of the
other person that you desire to join the outside
call. When the paged party answers, press {3}
key to activate the conference call.
To make an external conference call:
LIf you subscribe to external conference call
service provided by your service provider/
telephone company, please consult your service
provider/telephone company for full instructions
on this feature. An example of this feature is as
follows: While on an external call, press {R} key,
then dial the phone number of the other person
that you desire to join the outside call. When the
2nd called party answers, press {R} key then {3}
key to activate the conference call.
TG1855_1857AL(e)_QG.fm Page 4 Tuesday, June 26, 2007 6:02 PM
To Next Page
Loading...
