Preparation
11
Charger (KX-TG1857)
Note:
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
L The unit will not work during a power
failure. We recommend connecting a
standard telephone to the same
telephone line or to the same
telephone socket using a telephone
double adaptor.
L The unit is not designed to be used
with rotary (pulse dialling) services.
If you subscribe to an ADSL service
L Please attach a noise filter (contact
your ADSL provider) to the telephone
line between the base unit and the
telephone line socket in the event of
the following:
– Noise is heard during
conversations.
– Caller ID features (page 23) do not
function properly.
Location
L For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances
such as TVs, radios, personal
computers, or other phones.
– in a convenient, high, and central
location.
Battery installation and
replacement
Important:
L Use only the supplied rechargeable
batteries noted on page 4, 5.
L USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
L Do NOT use Alkaline/Manganese/Ni-
Cd batteries.
L Ensure correct polarities (S, T)
when installing the batteries.
USE ONLY the supplied
AC adaptor (smaller).
(220–240 V, 50/60 Hz)
Hooks
B
C
C
Telephone
line cord
To socket
Noise filter
(For ADSL users)
TG1855-1857AL(e-e).book Page 11 Thursday, July 12, 2007 5:31 PM
To Next Page
Loading...
