Preparation
14
Date and time
1
{j/OK}
2 Press {^} or {V} to select
“Handset Setup”. i {>}
3 Press {^} or {V} to select
“Time Settings”. i {>}
4 Press {^} or {V} to select
“Set Date & Time”. i {>}
5 Enter the current date, month, and
year.
Example: 17 May, 2007
{1}{7} {0}{5} {0}{7}
6 Enter the current hour and minute.
Example: 3:30 PM
{0}{3} {3}{0} i Press {*} until
“03:30 PM” is displayed.
7 {j/OK} i {ih }
Note:
L To correct a digit, press {<} or {>} to
move the cursor, then make the
correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
TG1855-1857AL(e-e).book Page 14 Thursday, July 12, 2007 5:31 PM
To Next Page
Loading...
