Getting Started
11
*1 KX-TG2521
*2 Voice mail subscribers only
*3 KX-TG2512
Turning the power
on/off
Power on
Press {ic} for about 1 second.
Power off
Press {ic} for about 2 seconds.
Initial settings
Display language
1
{j/OK}
2 {V}/{^}: “Handset Setup” i
{j/OK}
3 {V}/{^}: “Display Setup” i
{j/OK}
4 {V}/{^}: “Select Language” i
{j/OK}
5 {V}/{^}: Select your desired
language. i {j/OK} i {ic}
Note:
L If you select a language you cannot
read: {ic} i {j/OK} i {^}
3 times i {j/OK} i {V} 2 times
i {j/OK} 2 times i
{V}/{^}: Select your desired
language. i {j/OK} i {ic}
Dialling mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
L Paging, intercom
mode.
k Handset is on an
outside call.
L When flashing
slowly:
The call is put on
hold.
L When flashing
rapidly:
An incoming call is
now being
received.
ECO The base unit
transmission power is
set to “Low”. (page
12)
u Answering system is
on.
*1
(page 23)
5 Battery level
[P] Privacy mode is on.
(page 18)
0 New voice mail
message received.
*2
(page 29)
[IN USE] Someone is using the
line.
*3
Item Meaning
Symbol meaning:
Example: {V}/{^}: “Off”
Press {V} or {^} to select the words
in quotations.
Important:
L When the language selection is
displayed after installing the
batteries for the first time, perform
step 5.
TG2511_2521CX(e-e).book Page 11 Thursday, March 11, 2010 10:34 AM
To Next Page
Loading...
