Programming
17
Programmable settings
You can customise the unit by programming the following features using the handset.
Programming by scrolling through the display menus
1
{j/OK}
2 Press {V} or {^} to select the desired main menu. i {j/OK}
3 Press {V} or {^} to select the desired item in sub-menu 1. i {j/OK}
L In some cases, you may need to select from sub-menu 2. i {j /OK}
4 Press {V} or {^} to select the desired setting. i {j/OK}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ic}.
Note:
L In the following table, < > indicates the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
Caller List ––21
Answer System
(KX-TG2521)
Play New Msg. –24
Play All Msg. –24
Erase All Msg.
*1
–25
Greeting Start REC
*1
24
Play Greeting 24
Default
*1
24
Settings Remote Code
*1
25
Number of Rings
*1
<4 Rings>
27
Recording Time
*1
<3 Minutes>
28
Call Screening
<On>
23
Answer On
*1
–23
Answer Off
*1
–23
Intercom
*2
––30
Ph.Book Setup New Entry –16
Copy All
*2
(KX-TG2521)
––
TG2511_2521CX(e-e).book Page 17 Thursday, March 11, 2010 10:34 AM
To Next Page
Loading...
