Useful Information
36
Caller ID
Problem Cause/solution
Caller information is not
displayed.
L You must subscribe to a Caller ID service.
Contact your service provider/telephone
company for details.
L If your unit is connected to any additional
telephone equipment, remove and plug the
unit directly into the wall jack.
L If you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for
details.
L Other telephone equipment may be interfering
with this unit. Disconnect the other equipment
and try again.
Caller information is slow to
display.
L Depending on your service provider/
telephone company, the unit may display the
caller’s information at the 2nd ring or later.
L Move closer to the base unit.
The name stored in the
phonebook is not fully
displayed while an outside call
is being received.
L Edit the phonebook entry name to fit in 1 line
of text (page 16).
TG2511_2521CX(e-e).book Page 36 Thursday, March 11, 2010 10:34 AM
To Next Page
Loading...
