Preparation
For assistance, please visit http://www.panasonic.com/phonehelp 11
If you subscribe to a DSL service
Please attach a noise filter (contact your
DSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 26) do not
function properly.
Setting up the handset
Connecting the charger
L Use only the included Panasonic AC
adaptor PQLV19 or PQLV255.
Noise filter
To single-line
telephone
jack (RJ11C)
Available model:
KX-TG2632
Fasten the AC adaptor cord to prevent
it from being disconnected.
(120 V AC, 60 Hz)
Bottom of the charger
Hooks
TG2631_2632.book Page 11 Monday, December 26, 2005 2:02 PM
To Next Page
Loading...
