Programming
For assistance, please visit http://www.panasonic.com/phonehelp 29
Programmable settings
You can customize the unit by programming the following features using the handset. To
access the features, there are 2 methods: scrolling through the display menus (page 29)
or using the direct commands (page 31).
L Mainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
1 {MENU}
2 Press {^} or {V} to select the desired menu. i {Select}
L If there is a sub-menu(s), press {^} or {V} to select the desired item. i {Select}
Example: To access the handset ringer tone setting
Press {^} or {V} to select “Ringer setting”. i {Select}
Then press {^} or {V} to select “Ringer tone”. i {Select}
3 Press {^} or {V} to select the desired setting.
L This step may vary depending on the feature being programmed.
4 {Save} i {OFF}
Main menu Sub-menu 1 Sub-menu 2 Page
Message play – – page 36
Ringer setting Ringer volume ––
Ringer tone ––
Interrupt tone ––
Date and time
*1
– – page 18
Voice enhancer –––
Caller IQ
*2
View Info.? ––
Get new Info.? ––
Turn CIQ off? ––
Copy phonebook
*3
Copy 1 item – page 25
Copy all items – page 25
Customer support – – page 33
TG2631_2632.book Page 29 Monday, December 26, 2005 2:02 PM
To Next Page
Loading...
