Preparation
12
Display
Handset display items
*1 KX-TG4382/KX-TG4392/
KX-TG4393/KX-TG4394
Connections
Connect the AC adaptor cord (A ) by
pressing the plug firmly (B). Connect
the telephone line cord until it clicks into
the base unit and telephone line socket
(C).
Base unit
L Use only the supplied Panasonic AC
adaptor PQLV207AL.
L Use only the supplied telephone line
cord. Using another telephone line
cord may not allow the unit to work
properly.
Charger
L Use only the supplied Panasonic AC
adaptor PQLV209AL.
Note:
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
L The unit is not designed to be used
with rotary/pulse dialling services.
During a power failure
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line socket using a
telephone double adaptor.
If you subscribe to a DSL/ADSL
service
Please attach a DSL/ADSL filter (contact
your DSL/ADSL provider) to the
telephone line between the base unit
and the telephone line socket in the
event of the following:
Item Meaning
5 Battery level
[1] Handset number
*1
Line in
use
Someone is using the
line.
(220-240 V AC,
50/60 Hz)
To socket
Hook
Available for:
KX-TG4382/KX-TG4392/
KX-TG4393/KX-TG4394
A
(220–240 V AC,
50/60 Hz)
B
Hooks
TG43xxAL(e)_OI.book Page 12 Friday, May 23, 2008 3:51 PM
To Next Page
Loading...
