Programming
21
Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 21)
– using the direct commands (page 23)
L Mainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU}
2 Press {V} or {^} to select the desired main menu. i {Select}
3 Press {V} or {^} to select the desired item in sub-menu 1. i {Select}
L In some cases, you may need to select from sub-menu 2. i {Select}
4 Press {V} or {^} to select the desired setting. i {Save}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L See page 23 for the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
Message play
(KX-TG4391/
KX-TG4392/
KX-TG4393/
KX-TG4394)
––32
V.M. access ––36
Night mode On/Off –25
Start/End –25
Ringer setting Ringer volume ––
Ringer tone ––
Set date & time Date and time
*1
–15
Alarm –25
Time adjustment
*1,
*2
––
Customer
support
––26
TG43xxAL(e)_OI.book Page 21 Friday, May 23, 2008 3:51 PM
To Next Page
Loading...
