Useful Information
45
I cannot operate the answering
system.
L Someone is using the unit. Wait for the other
user to finish.
L A caller is leaving a message. Wait for the
caller to finish.
L The handset is too far from the base unit.
Move closer.
I cannot operate the answering
system remotely.
L You are entering the wrong remote access
code. If you forgot the remote access code,
store a new remote access code (page 33).
L Press each key firmly.
L The answering system is turned off. Turn it on
(page 34).
L You are using a rotary/pulse telephone. Try
again using a touch-tone phone.
While recording a greeting
message or listening to
messages, the unit rings and
recording stops.
L A call is being received. Answer the call and
try again later.
Problem Cause/solution
TG43xxAL(e)_OI.book Page 45 Friday, May 23, 2008 3:51 PM
To Next Page
Loading...
