Preparation
14 For assistance, please visit http://www.panasonic.com/help
Setting the unit before
use
Important:
LTo program features by scrolling
through the display menus, see page
24.
Display language
You can select either “English” or
“Español” as the display language.
The default setting is “English”.
1 KX-TG6021/KX-TG6022/
KX-TG6023
{MENU} i {0}{8}
KX-TG6051/KX-TG6052/
KX-TG6053/KX-TG6054
{MENU} i {0}{8}{1}
2 {V}/{^}: Select the desired setting.
3 Press the right soft key to save. i
{OFF}
Voice guidance language
You can select either “English” or
“Español” as the voice guidance
language of the answering system. The
default setting is “English”.
1 {MENU} i {0}{8}{2}
2 {V}/{^}: Select the desired setting.
3 {Save} i {OFF}
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 {MENU} i {0}{5}{1}
2 {V}/{^}: Select the desired setting.
3 {Save} i {OFF}
Date and time
Set the correct date and time.
– To use the available alarm function
(page 28).
– When you play back a message from
the answering system (page 31), the
unit announces the day and time it
was recorded. (KX-TG6051/KX-
TG6052/KX-TG6053/KX-TG6054)
1 {MENU} i {4}{1}
2 Enter the current month, day, and
year by selecting 2 digits for each.
Example: August 15, 2007
{0}{8} {1}{5} {0}{7}
3 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{0}{9} {3}{0}
4 {AM/PM}: Select “AM” or “PM”.
5 {Save} i {OFF}
Note:
LIf you make a mistake when entering
the date and time, press {<}, {>},
{^}, or {V} to move the cursor, then
make the correction.
LThe date and time may be incorrect
after a power failure. In this case, set
the date and time again.
Available model:
KX-TG6051/KX-TG6052/
KX-TG6053/KX-TG6054
TG602X_605X.book Page 14 Thursday, February 8, 2007 2:39 PM
To Next Page
Loading...
