Panasonic KX-TG6021 - Direct Command Programming; Feature Code Programming Guide

Programming
26 For assistance, please visit http://www.panasonic.com/help
Programming using the direct commands
1
{MENU}
2 Enter the desired feature code.
3 Enter the desired setting code. i {Save}
LThis step may vary depending on the feature being programmed.
4 {OFF}
Note:
LIn the following table, < > indicates the default setting.
LIf you make a mistake or enter the wrong code, press {OFF}, then start again from
step 1.
Feature Feature
code
Setting code System
setting
*1
Page
Alarm {8}{1}: Once {0}: <Off>–28
Auto talk
*2
{0}{3}{1}: On {0}: <Off>–16
Caller ID edit
(Caller ID number
auto edit)
{0}{4}{1}: <On> {0}: Off –23
Copy phonebook
(1 item)
{#}{1} ––20
Copy phonebook
(all items)
{#}{2} ––20
Date and time {4}{1} – r 14
Deregistration {0}{0}{2} ––39
HS
registration
{0}{0}{1} ––39
Key tone
*3
{0}{2}{1}: <On> {0}: Off ––
LCD contrast
(Display contrast)
{0}{1}{1}–{6}: Level 1–6 <3> – –
Message alert {0}{#} {1}: On {0}: <Off> – 35, 37
Ring color
(Ringer indicator
color)
{1}{4}{1}: <Color1>=Amber
{2}: Color2=Green
{3}: Color3=Red
{4}: Multicolor
––
Ringer tone
*4
(Handset)
{1}{2}{1}–{3}: Tone <1>–3
{4}–{7}: Melody 1–4
––
TG602X_605X.book Page 26 Thursday, February 8, 2007 2:39 PM