Panasonic KX-TG6431

7
Connections
Connect the telephone line cord until it
clicks into the base unit and telephone
line jack (A). Connect the AC adaptor
cord (B) by pressing the plug firmly (C).
Base unit
L Use only the supplied Panasonic AC
adaptor PQLV219.
TG933X(e).book Page 12 Wednesday, September 26, 2007 2:00 PM
Charger
L Use only the supplied Panasonic AC
adaptor PQLV219.
Note:
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
L The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line
using a Panasonic T-adaptor .
If you subscribe to a DSL service
Please attach a DSL filter (contact your
DSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– noise is heard during conversations.
(120 V AC,
60 Hz)
Hook
To single-line
telephone jack
(RJ11C)
A
C
B
B
(120 V AC, 60 Hz)
Hooks
C
– Caller ID features do not function
properly.
To single-line
telephone jack
(RJ11C)
DSL/ADSL filter