To Next PageTo Next PageWhy is my Panasonic KX-TG6511 not ringing?
If your Panasonic Cordless Telephone handset does not ring, check that the ringer volume is not turned off and adjust it. Also, make sure silent mode is turned off.
How to fix no dial tone on Panasonic KX-TG6511?
If you cannot hear a dial tone on your Panasonic Cordless Telephone, ensure the base unit’s AC adaptor or telephone line cord is properly connected. If the connections are correct, disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your service provider/ telephone company.
Why does my Panasonic KX-TG6511 Cordless Telephone beep and flash?
If your Panasonic Cordless Telephone handset beeps and/or the phone icon flashes, it indicates that the battery charge is low. You should fully charge the batteries.
What to do if my Panasonic KX-TG6511 unit does not work?
If your Panasonic Cordless Telephone unit does not work, make sure the batteries are installed correctly and fully charged. Check the connections. Unplug the base unit’s AC adaptor to reset the unit, then reconnect the adaptor and try again. Ensure the handset has been registered to the base unit and register the handset if needed.
What does a slowly flashing indicator mean on my Panasonic Cordless Telephone?
General| Type | Cordless Telephone |
|---|---|
| Series | KX-TG6511 |
| Frequency | 1.9 GHz |
| DECT | Yes |
| Number of Handsets Included | 1 |
| Caller ID | Yes |
| Call Waiting | Yes |
| Phonebook Capacity | 50 |
| Display Type | LCD |
| Display Size | 1.8 inches |
| Speakerphone | Yes |
| Answering Machine | No |
| Color | Black |
| Intercom | Yes |
| Range | Up to 300m outdoors, 50m indoors |
| Battery Type | Ni-MH |
| Display | Backlit |
| Expandable Handsets | Yes, up to 6 |
