Useful Information
47
For assistance, please visit http://www.panasonic.com/help
Wall mounting
The base unit can be mounted on a wall
by revolving the bracket to “WALL”
position (default: “DESK” stand
position).
Note:
L Make sure that the wall is strong
enough to support the weight of the
unit.
Base unit
1
Turn the bracket 180 degrees
counterclockwise in the “WALL”
direction until a click is heard.
L The bracket cannot be removed.
Do not turn the bracket more than
180 degrees.
2 Tuck in the telephone line cord (A).
Connect the AC adaptor cord and
telephone line cord (B).
3 Mount the unit on a wall then slide
down to secure in place.
To stand on a desk
Turn the bracket 180 degrees clockwise
from the “WALL” position to the “DESK”
direction until a click is heard.
Charger
Drive the screws (not supplied) into the
wall.
Bottom
A
B
Hook
83 mm
(3
1
/
4
inches)
or
102 mm
(4 inches)
83 mm
(
3
1
/
4
inches
)
Wall phone plate
102 mm
(4 inches)
(120 V AC, 60 Hz)
1
2
1
2
Bottom
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
TG6511(e).book Page 47 Wednesday, April 28, 2010 4:35 PM
To Next Page
Loading...
