To Next PageTo Next PageWhat to do if my Panasonic KX-TG6511 Cordless Telephone batteries still flash after being fully charged?
If you fully charged the batteries, but the symbol still flashes, '0' is displayed, or the operating time seems shorter on your Panasonic Cordless Telephone, clean the battery ends and the charge contacts with a dry cloth and charge again. It may also be time to replace the batteries.
Why is the indicator on the handset flashing slowly on my Panasonic KX-TG6511?
If the indicator on the handset of your Panasonic Cordless Telephone flashes slowly, new messages or new voice mail messages have been recorded. Listen to the new messages or new voice mail messages.
What to do if liquid entered the handset/base unit of my Panasonic Cordless Telephone?
If liquid or other form of moisture has entered the handset/base unit of your Panasonic Cordless Telephone, disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center.
What to do if I cannot operate the answering system remotely on my Panasonic KX-TG6511?
If you cannot operate the answering system remotely on your Panasonic Cordless Telephone, the remote access code may not be set, so set the remote access code. You might be entering the wrong remote access code; if you have forgotten it, enter the remote access code setting to check your current code. Ensure you press each key firmly. Also, the answering system may be turned off, so turn it on.
Why does my Panasonic Cordless Telephone not record new messages?
There are several reasons why your Panasonic Cordless Telephone unit may not be recording new messages. The answering system may be turned off, so turn it on. The message memory might be full, so erase unnecessary messages. The recording time might be set to “Greeting only”, so change the setting. If you subscribe to a voice mail service, messages are recorded by your service provider/telephone company, not your telephone.
Why is caller information not displayed on my Panasonic KX-TG6511 Cordless Telephone?
Several factors can cause caller information not to be displayed. First, ensure you subscribe to Caller ID service. If your unit connects to additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack. If you use a DSL/ADSL service, consider connecting a DSL/ADSL filter between the base unit and the telephone line jack. Also, the name display service may not be available in some areas, or other telephone equipment may be interfering with this unit, so disconnect the other equipment and try again.
What to do if I cannot make a call on my Panasonic KX-TG6511 Cordless Telephone?
If you cannot make a call on your Panasonic Cordless Telephone, the dialing mode may be set incorrectly, so change the setting. The handset may be too far from the base unit; move closer and try again.
What to do if I cannot hear a dial tone on my Panasonic KX-TG6511 Cordless Telephone?
If you cannot hear a dial tone on your Panasonic Cordless Telephone, check the connections, ensuring the base unit’s AC adaptor or telephone line cord is connected. Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your service provider/ telephone company.
How to correct the time on my Panasonic Cordless Telephone?
If the time on your Panasonic Cordless Telephone has shifted, it could be due to incorrect time information from incoming Caller ID. Set the time adjustment to “Manual” (off).
What to do if my Panasonic KX-TG6511 Cordless Telephone is not working?
If your Panasonic Cordless Telephone unit isn't working, ensure the batteries are installed correctly. Fully charge the batteries. Check all connections. Unplug the base unit’s AC adaptor to reset the unit, then reconnect it. Also, the handset may not be registered to the base unit, so register the handset.
General| Type | DECT telephone |
|---|---|
| Intercom | Yes |
| Answering machine | No |
| Languages support | ENG, ESP |
| Phonebook capacity | 50 entries |
| Redial list capacity | 5 |
| User memory phonebook | 16 |
| Backlight color | White |
| Display number of lines | 1 lines |
| Display size (HxV) (imperial) | 1.8 x 1.8 \ |
| Frequency band | 1.9 GHz |
| Channels quantity | 60 channels |
| Mounting type | Desk |
| Product color | Black |
| Battery type | AAA |
| Standby time | 264 h |
| Battery technology | Nickel-Metal Hydride (NiMH) |
| Battery recharge time | 7 h |
| Number of batteries supported | 2 |
Weight and Dimensions| Base weight | 328 g |
|---|---|
| Handset weight | 130 g |
| Base dimensions | 157 x 152 x 91 mm |
| Handset dimensions (WxDxH) | 48 x 33 x 160 mm |
