Panasonic KX-TG6511E - Customizing Unit Settings

Programming
22
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 22)
– using the direct commands (page 24)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
8
2 Press {V} or {^} to select the desired main menu. i M
3 Press {V} or {^} to select the desired item in sub-menu 1. i M
L In some cases, you may need to select from sub-menu 2. i M
4 Press {V} or {^} to select the desired setting. i M
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ic}.
Note:
L See page 24 for the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
Caller List
\
––30
Answer System
e
(KX-TG6521/
KX-TG6522/
KX-TG6523/
KX-TG6524)
Play New Msg. –34
Play All Msg. –34
Erase All Msg.
*1
–35
Greeting Start REC
*1
33
Play Greeting 33
Default
*1
33
Settings Number of Rings
*1
36
Recording Time
*1
37
Remote Code
*1
35
Call Screening 32
Answer On
*1
–32
Answer Off
*1
–32
Time Settings
e
Set Date/Time
*1
–16
Alarm –27
Time Adjustment
*1
––
Intercom
4
––39
TG6511-6521E(e).book Page 22 Monday, January 11, 2010 8:48 AM