Panasonic KX-TG6631

Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods.
n Scrolling through the display menus
1 MMENUN
2 PressMCNorMDNto select the desired main menu.AMSELECTN
3 PressMCNorMDNto select the desired item from the next sub-menus.
AMSELECTN
4 PressMCNorMDNto select the desired setting.AMSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, pressMOFFN.
n Using the direct commands
1 MMENUNAEnter the desired code.
Example: Press MMENUN M#N M1N M6N M0N.
2 Select the desired setting.AMSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, pressMOFFN.
Note:
R In the following table, <> indicates the default settings.
R In the following table,
indicates the reference page number.
R Display menu order may vary depending on your model.
Display the menu tree or direct commands by pressing MMENUN
Main menu: “Caller list” (Code: #213: page 36)
Main menu: “Answering device”
Sub-menu 1 Sub-menu 2 Settings Code
Play new msg.
(msg.: message)
– – #323 41
Play all msg.
– – #324 41
Erase all msg.
*1
– – #325 41
Greeting
Record greeting
*1
– #302 40
Check greeting
– #303 40
Pre-recorded
*1
(Reset to pre-recorded
greeting)
– #304 40
26
For assistance, please visit http://www.panasonic.com/help
Programming