Panasonic KX-TG6631

Key Operation
M8N Turn answering
system on
MPAUSEN
Pause message
*2
M9N or
MSTOPN
Stop recording
Stop playback
M0N Turn answering
system off
MGN M4N
*3
Erase currently
playing message
MGN M5N Erase all messages
MGN M6N Reset to a
pre-recorded greeting
message
*1 If pressed within the first 5 seconds
of a message, the previous
message is played.
*2 To resume playback:
MCN / MDN: “Playback” A
MSELECTN
*3 You can also erase as follows:
MERASEN A MCN / MDN: “Yes” A
MSELECTN
Calling back (Caller ID
subscribers only)
If caller information is received for the
call, you can call the caller back while
listening to a message.
1 Press MPAUSENduring playback.
2 MCN / MDN: “Call back” A
MSELECTN
Editing the number before calling back
1 Press MPAUSEN during playback.
2 MCN / MDN: “Edit & Call” A
MSELECTN
3 Press MEDITNrepeatedly until the
phone number is shown in the
desired format (page 36). A M
N
Erasing all messages
1 MMENUN M#N M3N M2N M5N
2 MCN / MDN: “Yes” A MSELECTN A
MOFFN
Voice memo
Available for:
KX-TG6641 series (page 3)
Recording a voice memo
You can use the base unit to leave a
voice memo (voice message) for
yourself or someone else (3 minutes
max.). Voice memos can be played back
later with the same operation used to
play back answering system messages.
1 MMEMON
2 After the unit beeps, speak clearly
about 20 cm (8 inches) away from
the microphone.
3 To stop recording, press MnN
(STOP).
Remote operation
Using a touch-tone phone, you can call
your phone number from outside and
access the unit to listen to messages or
change answering system settings. The
unit’s voice guidance prompts you to
press certain dial keys to perform
different operations.
Remote access code
A 3-digit remote access code must be
entered when operating the answering
system remotely. This code prevents
unauthorized parties from listening to
your messages remotely. The default
setting is“111”.
42
For assistance, please visit http://www.panasonic.com/help
Answering System