Panasonic KX-TG6643B

Making calls
Using the handset
1 L
ift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2 Press M
N or MCALLN.
3 When you finish talking, press
MOFFN or place the handset on the
base unit or charger.
Using the speakerphone
1 D
ial the phone number and press
M
N.
R S
peak alternately with the other
party.
2 When you finish talking, press
MOFFN.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press
M
N/M N.
Adjusting the receiver or speaker
v
olume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
T
he last 5 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1 MREDIALN or MEN REDIAL
R If there is a new message in the
voice mail or answering system,
MREDIALN is not displayed.
2 MbN: Select the desired phone
number.
3 M
N
Erasing a number in the redial list
1 MR
EDIALN or MEN REDIAL
2 MbN: Select the desired phone
number. a MERASEN
3 MbN: “Yes” a MSELECTN
4 MOFFN
Using the base unit
n K
X-TG6631 series: page 3
You can make calls with the base
unit after storing phone number in
speed dial key (page 25).
1 Press the speed dial key (MAN to
MCN).
2 When the other party answers,
speak into the microphone.
R Speak alternately with the
other party.
3 When you finish talking, press
MSP-PHONEN.
n KX-TG6641 series: page 3
1 Dial the phone number.
2 MSP-PHONEN
3 When the other party answers,
speak into the microphone.
R Speak alternately with the
other party.
4 When you finish talking, press
MSP-PHONEN.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from
the base unit to the handset:
– Press M
N on the handset, then
press MSP-PHONEN on the base
unit with the call sharing mode on
(page 29).
– If the handset is on the base unit,
simply lift it.
For assistance, please visit http://www.panasonic.com/help
15
Making/Answering Calls