Liquid damage
Problem Cause/solution
Liquid or other form of
m
oisture has entered the
handset/base unit.
R Disconnect the AC adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least 3
days. After the handset/base unit are completely
dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before
use. If the unit does not work properly, contact an
authorized service center.
Caution:
R T
o avoid permanent damage, do not use a microwave oven to speed up the drying
process.
56
For assistance, please visit http://www.panasonic.com/help
Useful Information
To Next Page
Loading...
