Panasonic KX-TG6645

Handset
1 During an outside call, press MINTN
to put the call on hold.
2 MCN / MDN: Select the desired unit.
A MSELECTN
3 Wait for the paged party to answer.
R If the paged party does not
answer, press M
N to return to
the outside call.
4 To complete the transfer:
PressMOFFN.
R The outside call is being routed to
the destination unit.
To establish a conference call:
Press MCONFN.
R To leave the conference, press
MOFFN. The other 2 parties can
continue the conversation.
R To put the outside call on hold,
press MHOLDN. To resume the
conference, press MCONFN.
Base unit
n KX-TG6631 series: page 3
1 During an outside call, press
MINTERCOMN.
R All registered handsets beep
for 1 minute.
2 Wait for the paged party to
answer.
R If paged party does not
answer, press MINTERCOMN
to return to the outside call.
3 To complete the transfer:
Press M
N.
R The outside call is being
routed to the handset.
To establish a conference call:
Press M N and then press M N
again.
R To leave the conference,
press M N. The other 2
parties can continue the
conversation.
n KX-TG6641 series:page 3
1 During an outside call, press
MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset,
enter the handset number.
– To page all handsets, press
M0N or wait for a few seconds.
2 Wait for the paged party to
answer.
R If paged party does not
answer, press MINTERCOMN
to return to the outside call.
3 To complete the transfer:
Press M
N.
R The outside call is being
routed to the handset.
To establish a conference call:
Press MCONFN.
R To leave the conference,
press M N. The other 2
parties can continue the
conversation.
R To put the outside call on hold,
press MHOLDN. To resume the
conference, press MCONFN.
Answering a transferred call
Handset
Press M
N to answer the page.
Base unit
Press M
N to answer the page.
For assistance, please visit http://www.panasonic.com/help
49
Intercom/Locator