Wall mounting
The base unit can be mounted on a wall
by revolving the bracket to “WALL”
position (default: “DESK” stand position).
Note:
R Make sure that the wall and the fixing
method are strong enough to support
the weight of the unit.
Base unit
1 Turn the bracket 180 degrees
counterclockwise in the “WALL”
direction until a click is heard.
R The bracket cannot be removed.
Do not turn the bracket more than
180 degrees.
2 Tuck in the telephone line cord (A).
Connect the AC adaptor cord and
telephone line cord (B).
3 Mount the unit on a wall then slide
down to secure in place.
83 mm
(3
1
/
4
inches)
or
102 mm
(4 inches)
83 mm
(
3
1
/
4
inches
)
Wall phone plate
102 mm
(4 inches)
1
2
1
2
To stand on a desk
Turn the bracket 180 degrees clockwise
from the “WALL” position to the “DESK”
direction until a click is heard.
50
For assistance, please visit http://www.panasonic.com/help
Useful Information
To Next Page
Loading...
