Handset phonebook
The phonebook allows you to make calls
without having to dial manually. You can add
100 names and phone numbers.
Adding entries
1
a
2 Enter the party’s name (16 characters
max.). a
R You can change the character entry
mode by pressing
(page 42).
3 Enter the party’s phone number (24 digits
max.). a 2 times
R To add other entries, repeat from step
2.
4 M N
Note:
R Your service provider/telephone company
may charge you for a local call if the
number dialled has the area code prefix
included. If this is unacceptable, dial only
the 7-digit local number. Do not dial the “0”
prefix or the area code.
Finding and calling from a
phonebook entry
Scrolling through all entries
1
2 MbN: Select the desired entry.
R You can scroll through the phonebook
entry by pressing and holding MCN or
MDN.
3 M
N
Searching by first character
1
R Change the character entry mode if
necessary:
a MbN: Select the character
entry mode. a
2 Press the dial key (0 to 9, or #) which
contains the character you are searching
for (page 42).
R Press the same dial key repeatedly to
display the first entry corresponding to
each character located on that dial key.
R If there is no entry corresponding to
the character you selected, the next
entry is displayed.
3 MbN: Scroll through the phonebook if
necessary.
4 M
N
Editing entries
1 Find the desired entry (page 22). a
2 MbN: “Edit” a
3 Edit the name if necessary (16 characters
max.; page 42). a
4 Edit the phone number if necessary (24
digits max.). a
2 times a M N
Erasing entries
Erasing an entry
1 Find the desired entry (page 22).
2
a MbN: “Yes” a a M N
Erasing all entries
1
a
2 MbN: “Erase All” a
3 MbN: “Yes” a
4 MbN: “Yes” a a M N
Chain dial
This feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually.
22
Phonebook
To Next Page
Loading...
