Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods.
n Scrolling through the display menus
1
2 Press MCN, MDN, MEN, or MFN to select the desired main menu. a
3 Press MCN or MDN to select the desired item from the next sub-menus. a
4 Press MCN or MDN to select the desired setting. a
R This step may vary depending on the feature being programmed.
R To exit the operation, press M
N.
n Using the direct command code
1
a Enter the desired code.
Example: Press
#101.
2 Select the desired setting. a
R This step may vary depending on the feature being programmed.
R To exit the operation, press M
N.
Note:
R In the following table, < > indicates the default settings.
R In the following table,
indicates the reference page number.
R Display menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
Main menu:
“Caller List”
Operation
Code
Viewing the caller list. #213 33
Main menu: “Answer System”
*1
Sub-menu 1 Sub-menu 2 Settings Code
Play New Msg.
(Msg.: message)
– – #323 36
Play All Msg.
– – #324 36
Erase All Msg.
*2
– – #325 37
Greeting
Start REC
*2
(Record greeting)
– #302 36
Play Greeting
– #303 36
Default
*2
(Reset to pre-recorded
greeting)
– #304 36
24
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Programming
To Next Page
Loading...
