To Next PageTo Next PageHow to fix time shift on my Panasonic KX-TG6841 Cordless Telephone?
If the time on your Panasonic Cordless Telephone has shifted, it could be due to incorrect time information from incoming Caller ID. Set the time adjustment to “Manual” (off).
What to do if my Panasonic KX-TG6841 Cordless Telephone handset does not turn on?
If your Panasonic Cordless Telephone handset does not turn on even after installing charged batteries, place the handset on the base unit or charger to turn it on.
What to do if my Panasonic Cordless Telephone does not record new messages?
If your Panasonic Cordless Telephone does not record new messages, ensure that the answering system is turned on. Check if the message memory is full and, if so, erase unnecessary messages. Also, verify that the recording time is not set to “Greeting only” and change the setting if it is. If you subscribe to a voice mail service, messages are recorded by your service provider/telephone company, not your telephone; in this case, change the unit’s number of rings setting or contact your service provider/telephone company.
What to do if my Panasonic KX-TG6841 handset beeps and/or flashes?
If the handset of your Panasonic Cordless Telephone beeps and/or flashes, it indicates that the battery charge is low. Fully charge the batteries.
Why is there noise on my Panasonic KX-TG6841, and the sound cuts in and out?
If you experience noise or sound cutting in and out on your Panasonic Cordless Telephone, it could be due to high electrical interference in your area. Try re-positioning the base unit and using the handset away from sources of interference. Also, move closer to the base unit. If you use a DSL/ADSL service, consider connecting a DSL/ADSL filter between the base unit and the telephone line jack.
What to do if the base unit does not ring on my Panasonic Cordless Telephone?
If the base unit of your Panasonic Cordless Telephone does not ring, the ringer volume may be turned off; adjust the ringer volume. Silent mode may be turned on; turn it off.
What to do if the handset does not ring on my Panasonic Cordless Telephone?
If the handset of your Panasonic Cordless Telephone does not ring, the ringer volume may be turned off; adjust the ringer volume. Silent mode may be turned on; turn it off.
Why I cannot hear a dial tone on my Panasonic KX-TG6841 Cordless Telephone?
If you cannot hear a dial tone on your Panasonic Cordless Telephone, the base unit’s AC adaptor or telephone line cord may not be connected properly; check the connections. Alternatively, disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact service personnel to have the unit repaired. If the working telephone does not operate properly, contact your service provider/telephone company.
General| Type | Cordless Telephone |
|---|---|
| Number of Handsets | 1 |
| DECT Technology | Yes |
| DECT Security | Yes |
| Speakerphone | Yes |
| Answering System | Yes |
| Caller ID | Yes |
| Display | LCD |
| Talk Time | 15 hours |
| Standby Time | 170 hours |
| Frequency | 1.9 GHz |
| Call Waiting | Yes |
| Intercom | Yes |
| Headset Jack | Yes |
| Power Backup | No |
| Range | Up to 50 meters indoors |
| Handsets | Up to 6 |
| Battery Type | Ni-MH |
| Expandable | Yes |
Details the physical components and models of the system.
Lists supplied accessories included with the product.
Lists optional accessories available for purchase.
Information on adding more handsets to the system.
Covers warnings, safeguards, medical, installation, and general safety instructions.
Guidelines for optimal placement, environment, routine care, and battery.
Technical specs, disposal, energy efficiency, and other notices.
Connecting base unit, charger, and installing batteries.
Important setup notes, battery performance, and eco mode.
Identification of handset/base unit controls and display icons.
Setting date/time, language, voice guidance, and dialing modes.
Using handset, speakerphone, redial, and phonebook.
Answering, ringer volume, hold, mute, flash, and call waiting.
Clarity booster, noise reduction, equalizer, and call share.
Making/answering calls during power outages.
How to add new contacts to the phonebook.
Keypad guide for names and organizing entries.
Changing group names, finding, editing, and erasing entries.
Assigning, editing, and erasing speed dial numbers.
How to dial using speed dial keys.
Overview of features, menu trees, and command codes.
Settings for answering device, intercom, alerts, date/time.
Settings for alarm, silent mode, caller ID, handset names, key detectors.
Call block, speed dial, voice mail, line modes, and call sharing.
Phonebook, caller list, and support access via base unit.
Explanations for programming options and settings.
Setting alarms and activating/deactivating silent mode.
Setting silent mode duration and handset names.
Blocking unwanted calls and storing numbers.
Setting first ring and managing call block numbers.
Rejecting calls with no displayed number.
Adding and removing handset registrations.
Requirements, features, and missed calls display.
Announcing callers and phonebook names.
Assigning ringers and managing caller lists.
Auto-editing caller numbers for local calls.
Erasing caller information and storing it in the phonebook.
System functions, memory, on/off, screening, and greetings.
Recording greetings and listening to messages.
Controls for message playback and calling back.
Erasing messages and listening via handset.
Features for notifying about new messages.
Accessing system remotely and managing codes.
Using voice prompts and direct commands for remote operation.
Configuring answering system parameters like ring count.
Notes for subscribers of voice mail service.
Setting recording time and greeting-only modes.
Explanation of service provided by telephone provider.
Managing voice mail access numbers.
Detecting provider signals for voice mail.
Accessing voice mail messages.
Making, answering, and transferring intercom calls.
Using the locator feature to find misplaced handsets.
Procedures for transferring outside calls.
Establishing and managing conference calls.
Instructions for mounting the base unit on a wall.
Common display messages and their solutions.
Solutions for general operational problems.
Solutions for settings and battery recharge issues.
Solutions for call and intercom related issues.
Solutions for Caller ID and announcement problems.
Solutions for answering system issues and liquid damage.
Regulatory compliance and FCC information.
Safety guidelines regarding RF exposure limits.
Information on using the phone with hearing aids.
Details on TIA-1083 standard compliance.
Contact info for support and buying parts.
Details of the product's limited warranty coverage.
Instructions for sending the product for repair and online requests.
Specific terms and conditions excluded from warranty.
Guidelines for packing and shipping the product.
