Programming
23
Programmable settings
You can customise the unit by programming the following features using the handset.
Programming by scrolling through the display menus
1
K (middle soft key)
2 Press {V} or {^} to select the desired top-menu. i M
3 Press {V} or {^} to select the desired item in sub-menu 1. i M
L In some cases, you may need to select from sub-menu 2. i M
4 Press {V} or {^} to select the desired setting. i M
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ih}.
Note:
L For other top-menus, please refer to each chapter.
L In the following table, < > indicates the default settings.
L The current item or setting is highlighted on the display.
Top-menu Sub-menu 1 Sub-menu 2 Page
Handset Setup Time Settings Set Date & Time
*1
16
Alarm 25
Time Adjustment
*1
<Caller ID[Auto]>
25
Ringer Setup Ringer Volume
<Maximum>
–
Ringtone
*2, *3
<Ringtone 1>
–
Display Setup Select Language
<English>
16
Contrast
<Level 3>
–
Register H.set –26
Keytones
*4
<On>
––
Auto Talk
*5
<Off>
–18
To Next Page
Loading...
