Caller ID Service
29
Caller list
Important:
L Only 1 person can access the caller
list at a time.
Viewing the caller list and
calling back
1
K (middle soft key)
2 {V}/{^}: “Caller List” i M
3 Press {V} to search from the most
recent call, or press {^} to search
from the oldest call.
4 To call back, press {C}.
To exit, press {ih}.
Note:
L If the item has already been viewed or
answered, “Q” is displayed, even if it
was viewed or answered using
another handset.
L To erase the item, press W. i
{V}/{^}: “Yes” i M
L If you do not want to dial the area
codes when making calls from the
caller list, you can store the area
codes which you want the unit to
delete automatically (page 26).
Editing a caller’s phone
number before calling back
The caller’s telephone number, which is
sent to your telephone from your local
telephone exchange, includes “0” and an
area code prefix. For local calls, “0” and
the area code prefix can be omitted.
1 K (middle soft key)
2 {V}/{^}: “Caller List” i M
3 {V}/{^}: Select the desired entry.
i K
4 {V}/{^}: “Edit and Call” i
M
5 Edit the number.
L Press dial key ({0} to {9}) to add,
{C/T} to delete.
6 {C}
Erasing caller information
1
K (middle soft key)
2 {V}/{^}: “Caller List” i M
3 {V}/{^}: Select the desired entry.
i K
4 {V}/{^}: Select “Erase” or “Erase
All”. i M
5 {V}/{^}: “Yes” i M i {ih}
Storing caller information to
the phonebook
1
K (middle soft key)
2 {V}/{^}: “Caller List” i M
3 {V}/{^}: Select the desired entry.
i K
4 {V}/{^}: “Add Phonebook” i
M
5 To store the name, continue from
step 3, “Adding entries”, page 21.
To Next Page
Loading...
