Charging the cellular phone by
USB
Available for:
K
X-TG7871 series (page 3)
By connecting a USB cable (not supplied) to
t
he cellular phone and the base unit, you can
charge a cellular phone. However, the cellular
phone cannot exchange data with the base
unit through a USB cable.
Belt clip
n
To attach n To remove
Display/Indicators
Handset display items
Item Meaning
Within base unit range
Item Meaning
Out of base unit range
The landline is in use.
R W
hen flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
A cellular line is in use.
R W
hen flashing:
The cellular call is put on
hold.
R When flashing rapidly:
A cellular call is being
received.
A cellular phone is
c
onnected.
*1
Ready to make/
receive cellular calls.
R When turned off:
A cellular phone is not
connected to the base
unit. (page 19)
– The cellular line is
s
elected for the ringer
setting.
– A cellular call is being
received on that line.
Eco mode is on.
*
2
(page 12)
Noise reduction is set.
(page 24)
Equalizer is set. (page 24)
Z Speakerphone is on.
(
page 21)
Ringer volume is off.
*
3
(page 22, 38)
Silent mode is on.
(
page 45)
Call sharing mode is off.
(
page 41)
Alarm is on. (page 44)
Handset number
Battery level
Blocked call (page 45)
14
For assistance, please visit http://www.panasonic.com/help
Getting Started
To Next Page
Loading...
