incoming call barring feature is available
i
nstead of the nuisance call block feature.
Storing unwanted callers
n S
toring a single phone number
Important:
R You must include the area code when
storing phone numbers in the call block
list.
From the caller list:
1 MCN (
)
2 MbN:
Select the entry to be blocked. a
M
N a M N
3 MbN:
“Save CID” a MOKN
4 MbN: “Nuisance Call Block” a
MOKN
5 MbN: “Yes” a MOKN a MeN
By entering phone numbers:
1 M
N
(right soft key) #217
2 MbN: “Single Number” a MOKN
3 M
N a MbN:
“Add” a MOKN
4 Enter the phone number (24 digits
max.). a MOKN
R To erase a digit, press MCN.
5 MeN
n Storing a range of numbers
1 M
N
(right soft key) #217
2 MbN: “Range of Numbers” a MOKN
3 M
N a MbN:
“Add” a MOKN
4 Enter the desired number (2-8 digits).
a MOKN
R To erase a digit, press MCN.
5 MeN
Blocking incoming calls that have no
p
hone number
You can reject calls when no phone number is
provided, such as private callers.
1 M
N
(right soft key) #240
2 MbN: Select the desired setting. a MOKN
3 MeN
Viewing/editing/erasing call block
n
umbers
1 M
N (right soft key) #217
2 MbN: “Single Number” or “Range of
Numbers” a MOKN
3 MbN: Select the desired entry.
R To exit, press MeN.
4 To edit a number:
M N a
Edit the phone number. a
MOKN a MeN
To erase a number:
M
N a MbN:
“Yes” a MOKN a MeN
Note:
R When editing, press the desired dial key to
add, MCN to erase.
Erasing all call block numbers
1 M N
(right soft key) #217
2 MbN: “Single Number” or “Range of
Numbers” a MOKN
3 M
N a MbN:
“Erase All” a MOKN
4 MbN: “Yes” a MOKN
5 MbN: “Yes” a MOKN a MeN
Setting call restriction
Y
ou can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1 M
N
(right soft key) #256
2 Enter the base unit PIN (default: “0000”).
R If you forget your PIN, see page 47.
3 Select the handsets to be restricted by
pressing 1 to 6.
R All handsets registered to the base unit
are displayed.
R “
” is displayed next to the selected
h
andset numbers.
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
31
Programming
To Next Page
Loading...
