Useful Information
47
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Programmable settings
I do not know how to erase y
(Missed call) from the display.
L There are unviewed missed calls remaining.
View them and erase y in the following way.
1 K (middle soft key) i j i M
2 Press {V} to search from the most recent
call, or press {^} to search from the oldest
call.
Problem Cause/solution
I have changed the display
language to a language I
cannot read.
L Change the display language (page 16).
While programming, the
handset starts to ring.
L A call is being received. Answer the call and
start again after hanging up.
I cannot register a handset to a
base unit.
L The maximum number of base units (4) is
already registered to the handset. Cancel
unused base unit registrations from the
handset (page 30).
L The maximum number of handsets (6) is
already registered to the base unit. Cancel
unused handset registrations from the base
unit (page 30).
L You entered the wrong PIN. If you forget your
PIN, see “I cannot remember the PIN.”
(page 47).
L Place the handset and the base unit away
from other electrical appliances.
I cannot remember the PIN. L Change the PIN using the following method.
1 K (middle soft key) i < i M
2 {V}/{^}: “Base Unit PIN” i M
3 {*}{7}{0}{0}{0}
4 Enter the new 4-digit base unit PIN. i
M i {ih}
Problem Cause/solution
TG8021E(e).book Page 47 Friday, June 13, 2008 1:19 PM
To Next Page
Loading...
