Panasonic KX-TG9471B

20
KX-TG9471B/KX-TG9472B/KX-TGA939T
8 Service Mode
8.1. Engineering Mode
8.1.1. Base Unit
1). Press " " (middle soft key).
B/U key operation B/U LCD
Important:
Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit.
Engineering Mode
Read EEPROM
Write EEPROM
Engineering Mode
Read EEPROM
Write EEPROM
3). Select "Write EEPROM" by Navigator key.
4). Press " " (middle soft key).
2). Enter "7", "2", "6", "2", "7", "6", "6", "4".
Note: 7262 7664 = PANA SONI
(see letters printed on dial keys)
Set Address:
MENU
BACK
SELECT
SELECT
BACK
SELECT
LINE 1 LINE 2
LINE 1 LINE 2
LINE 1 LINE 2
LINE 1 LINE 2
BACK
BACK
SELECT
View Caller ID
BACK
OK
5). Enter " ٨ ", " ٨ ", " ٨ ", " ٨ " (Address). (*2)
Set Address:
Default Data
Display
Soft keys
Navigator key
{^}/{V}/{7}/{8})
{ } (STOP) (EXIT)
(