Panasonic KX-TG9471B

64
KX-TG9471B/KX-TG9472B/KX-TGA939T
11.7.2. How to written to USB_IC
11.7.2.1. Downloading software (preparation)
Refer to Installing the “Telephone Plug-in” (P.65)
CDROM
PNJX1009Z
PNZZTG9471B
(They are available at web site)
System requirements (PC)
Item Specifications
CPU
1.0 GHz Intel
®
Pentium
®
/Celeron
®
processor or comparable CPU or
higher processor
RAM 512 MB or more
OS
LMicrosoft Windows
®
XP
Service Pack 3 or later (32-bit
only)
LMicrosoft Windows Vista
®
Service Pack 2 or later
LMicrosoft Windows 7
Service Pack 1 or later
Microsoft
Office
Outlook
LMicrosoft Office Outlook 2003
Service Pack 3 or later
LMicrosoft Office Outlook 2007
Service Pack 2 or later
LMicrosoft Office Outlook 2010
or later (Service Pack)
Hard disk 20 MB or more
Video
resolution
1,024 x 768 or higher
Others
LCD-ROM drive
LUSB 2.0
You can download the software from Web site as below.
(1) CP210x_VCP_Win_XP_S2K3_Vista_7.exe
(2) CP210xSetIDs.exe
(3) Installing the "Telephone Plug-in"
https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
Click Download for Windows XP/Server 2003/Vista/7 (v6.3a)
Click tools
Copy "an144sw.zip" to an appropriate folder
VCP DRIVER Kit
Activate "CP210x_VCP_Win_XP_S2K3_Vista_7.exe" from CDROM (PNZZTG9471B) in the "Driver" folder, and follow the wizard
https://www.silabs.com/PRODUCTS/INTERFACE/USBTOUART/Pages/usb-to-uart-bridge.aspx