3 MbN:
Select the desired alarm option. a
MOKN
“O
ff”
Turns alarm off. Go to step 9.
“O
nce”
An alarm sounds once at the set time.
“D
aily”
An alarm sounds daily at the set time.
Go to step 5.
“W
eekly”
Alarm sounds weekly at the set time(s).
4 P
roceed with the operation according to
your selection in step 3.
n Once:
Enter the desired date and month. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press M
N. a MOKN
5 Set the desired time. a MOKN
6 Enter a text memo (10 characters max.).
a MOKN
7 MbN: Select the desired alarm tone. a
MOKN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8 MbN: Select the desired snooze setting.
a MOKN
9 MOKN a M
N
N
ote:
R Press M
N
to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key or M
N
to stop the
sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Nuisance call block
T
his feature rejects calls from unwanted
callers (Caller ID subscribers only). The
following items are available when storing
phone numbers in the call block list (30 max.).
– “Single Number”: The unit can reject
calls from specific phone numbers.
– “Range of Numbers”: The unit can
reject calls that begin with a number stored
in the call block list, such as a toll-free
phone number prefix or certain area codes.
You can also set the unit to reject calls that do
not have a phone number.
When a call is received, the unit does not ring
while the caller is being identified. If the
caller’s phone number matches an entry in the
call block list, the unit emits no sound to the
caller, and disconnects the call.
Important:
R Rejected calls are logged in the caller list.
Storing unwanted callers
Storing a single phone number
I
mportant:
R You must include the area code when
storing phone numbers in the call block list.
n From the caller list:
1 M
N
2 MbN:
Select the entry to be blocked. a
M
N
3 MbN:
“Save CID” a MOKN
4 MbN: “Nuisance Call Block” a
MOKN
5 MbN: “Yes” a MOKN a M
N
n B
y entering phone numbers:
1 M
N#217
2 MbN:
“Single Number” a MOKN
3 M
N a MbN:
“Add” a MOKN
4 Enter the phone number (24 digits
max.).
R To erase a digit, press MCN.
5 MOKN a M
N
24
Programming
TGC22xAL_OI_(en-en)_0530_ver.002.pdf 24 2014/05/30 22:00:42
To Next Page
Loading...
