Panasonic KX-TGC220AL - Getting Started; Setting Up Connections; Battery Installation and Charging

Setting up
Connections
n
Base unit
Connect the AC adaptor to the unit by
p
ressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
o
utlet.
Connect the telephone line cord to the
u
nit, then to the telephone line socket
until you hear a click.
A DSL/ADSL filter (not supplied)
*
1
is
required if you have a DSL/ADSL service.
*1 Connect a DSL/ADSL filter between the
telephone plug and telephone line cord.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV226AL.
R Use only the supplied telephone line cord.
3
4
5
4
1
2
n
Charger
A Connect the AC adaptor plug to the
u
nit until you hear a click.
B Connect the AC adaptor to the power
o
utlet.
Note:
R U
se only the supplied Panasonic AC
adaptor PNLV233AL.
1
2
Battery installation
R U
SE ONLY rechargeable Ni-MH batteries
AAA (R03) size (
1
).
R D
o NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
, ).
1
R Follow the directions on the display to set
up the unit.
9
Getting Started
TGC22xAL_OI_(en-en)_0530_ver.002.pdf 9 2014/05/30 22:00:40