Registering a handset to the base unit
T
he supplied handset and base unit are pre-registered. If for some reason the handset is not
registered to the base unit, re-register the handset.
1 Handset:
M
N#130
2 B
ase unit:
Press and hold M
N
for about 5 seconds.
R If all registered handsets start ringing, press M
N again to stop, then repeat this step.
(KX-TGC262/KX-TGC263/KX-TGC264)
3 Handset:
MOKN a Wait until “Base PIN” is displayed. a Enter the base unit PIN (default: “0000”).
a MOKN
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
15
Useful Information
To Next Page
Loading...
