message, your own recorded greeting message is
e
rased.
You can configure this setting using either the
base unit or one of the handsets.
Handset / Base Unit
1 MM
ENUN#304
2 MOKN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Playing back the greeting message
Handset / Base Unit
1 MMENUN#303
2 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Listening to messages
I
mportant:
R If your phone service provider offers voicemail
service, the voicemail service may answer calls
before the base unit’s built-in answering system
has a chance to answer calls and record
messages.
In this case, messages you expect to be
recorded by the answering system will be
recorded on the voicemail service. For more
information, see “For landline voicemail service
subscribers” (page 47).
R When using the base unit or handset to listen to
messages, the noise reduction feature
(page 19) is activated automatically in spite of
the setting (
is not displayed).
Using the base unit
W
hen new messages have been recorded:
– M
N
on the base unit flashes.
–
is displayed on the base unit with the total
n
umber of new messages.
Press M
N.
R D
uring playback, M
N
on the base unit lights.
R If new messages have been recorded, the base
unit plays back new messages.
R If there are no new messages, the base unit
plays back all messages.
Operating the answering system during
p
layback
Key Operation
MDN
or MCN
OR
MAMPLIFIED
VOLUMEN
*1
Adjust the speaker volume
M
N
Repeat message
*
2
M
N Skip message
MP
AUSEN Pause message
To resume playback, press
M
N.
M N Stop playback
ME
RASEN Erase currently playing message
*1 Each press MA
MPLIFIED VOLUMEN, speaker
volume is increased by several levels.
*2 If pressed within the first 5 seconds of a
message, the previous message is played.
Calling back (Caller ID subscribers only)
L
ift the corded handset.
n Editing the number before calling back
1 Press MEDITN during playback.
2 Edit the number.
3 Lift the corded handset.
Rewinding the message
P
ress and hold M
N
until the unit plays the
desired part of the message.
R During rewinding, the base unit makes a
continuous beeping sound. Rewinding speed
may vary depending on the recorded message.
R At the beginning of the message, the unit plays
the message at normal speed.
Fast-forwarding the message
P
ress and hold M
N
until the unit plays the
desired part of the message.
R During fast-forwarding, the base unit makes a
continuous beeping sound. Fast-forwarding
speed may vary depending on the recorded
message.
R Even if you press and hold M
N
when the end
of this message is played, the next message is
played at normal speed.
Erasing all messages
P
ress MERASEN 2 times while the unit is not in use.
42
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Answering System
To Next Page
Loading...
