– Handset: “ ” or “ ” indicates the caller
information for blocked calls.
– Base unit: “ ”
or “
”
indicates the caller
information for blocked calls.
Editing a caller’s phone number
Y
ou can edit a phone number in the caller list by
removing its area code and/or the long distance
code “1”.
Handset
1 MCN
CID
2 MbN: Select the desired entry. a MMENUN
3 MbN: “Edit” a MSELECTN
4 Press MEDITN repeatedly until the phone
number is shown in the desired format.
5 MTALK/ZN
Base unit
1 MCIDN
2 MbN: Select the desired entry.
3 Press MEDITN repeatedly until the phone
number is shown in the desired format.
4 Lift the corded handset.
Caller ID number auto edit feature
Handset / Base unit
O
nce you call back an edited number, the unit
which was used to call back remembers the area
code and format of the edited number. The next
time someone calls from the same area code,
caller information is customized by the unit as
follows:
– When the call is being received, the Caller ID
number is displayed in the same format as the
edited number.
– After the call has ended, the caller’s phone
number is displayed in the same format as the
edited number, when reviewed from the caller
list.
For example, you can use this feature to set the
unit to ignore the area code of callers in your area,
so that you can call these local numbers using
caller information without dialing the area code.
To activate this feature, you must edit an entry in
the caller list, then call that number. After that,
phone numbers from that caller’s area code are
edited automatically.
This feature can be set for each unit (page 43).
T
he default setting is “On”.
Note:
R Phone numbers from the 4 most recently edited
area codes are automatically edited.
Erasing selected caller information
Handset / Base unit
1 P
roceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
2 MbN: Select the desired entry.
3 MERASEN a MbN: “Yes” a MSELECTN
4 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Erasing all caller information
Handset / Base unit
1 P
roceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
2 MERASEN a MbN: “Yes” a MSELECTN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
For assistance, please visit http://shop.panasonic.com/support
51
Caller ID Service
To Next Page
Loading...
