Setting up
Connections
n
Base unit
Connect the AC adaptor to the unit by
p
ressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
o
utlet.
Connect the telephone line cord to the
u
nit, then to the telephone line jack until
you hear a click.
A DSL/ADSL filter (not supplied) is
r
equired if you have a DSL/ADSL service.
Note:
R U
se only the supplied Panasonic AC
adaptor PNLV226E.
R Use only the supplied telephone line cord.
n Charger
Connect the AC adaptor plug to the unit
u
ntil you hear a click.
Connect the AC adaptor to the power
o
utlet.
Note:
R U
se only the supplied Panasonic AC
adaptor PNLV233E.
Battery installation
R U
SE ONLY rechargeable Ni-MH batteries
AAA (R03) size (
).
R D
o NOT use alkaline/manganese/Ni-Cd
batteries.
R Confirm correct polarities (
, ).
R F
ollow the directions on the display to set
up the unit.
Battery charging
C
harge for about 7 hours.
R Confirm “Charging” is displayed (
).
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
11
Getting Started
TGJ32xE(en)_0305_ver011.pdf 11 2015/03/05 14:31:39
To Next Page
Loading...
