Panasonic KX-TGM430 - Base Unit Backup Batteries

Note:
R A
ctual battery performance depends on usage and ambient environment.
Handset battery installation (for replacement)
R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
1
).
R D
o NOT use alkaline/manganese/Ni-Cd batteries.
R Confirm correct polarities (
, ).
1
Base unit backup batteries
2
rechargeable Ni-MH batteries are installed in the base unit at the
time of shipment. These batteries can be used to supply power to
the base unit in the event of a power failure.
Before initial use: Remove the yellow insulation sheet before
using the base unit.
Base unit battery status when a power failure occurs
Item Battery status
Power backup mode is on.
*
1
Battery power is low.
*
2
*1
When the base unit is running on battery power, “ ” is displayed on the message counter
o
f the base unit. If there is other information that can be displayed, such as the number of
answering system messages, the other information is displayed.
*2 When the base unit is running on battery power and the remaining battery power is too low,
“
” flashes and the base unit beeps. Additionally, the base unit’s message indicator
f
lashes.
Panasonic Ni-MH battery performance when operating on
backup battery power
Operation Operating time
In continuous use 3 hours max.
For assistance, please visit http://shop.panasonic.com/support
15
Getting Started
TGM43x(en)_0426_ver031.pdf 15 2016/04/26 10:55:17