To use a neckloop
W
hen using a neckloop with the handset, you can speak using the
neckloop’s microphone or using the handset’s microphone.
Important:
R You must set the headset type before use (page 33).
1 Connect the neckloop to the headset jack on the side of the
handset.
2 Use the handset as normal.
R Refer to your neckloop’s operating instructions for details.
R If your neckloop does not have a microphone, speak into the handset’s microphone.
R You can use volume booster (page 27), speech booster (page 29), tone control
(page 26), and other features even when using a neckloop.
Setting the headset type
Set this setting to match the type of device connected. This feature
can be set for each unit.
“Headset” (default): Disables the handset’s microphone. The
connected headset is used for talking and listening.
“Neckloop with Mic”: Disables the handset’s microphone. The
connected neckloop is used for talking and listening.
“Neckloop w/o Mic”: Enables the handset’s microphone. The
connected neckloop is used for listening only.
1 MMENUN#786
2 MbN: Select the desired setting. a MSAVEN a MOFFN
For assistance, please visit http://shop.panasonic.com/support
33
Accessibility
To Next Page
Loading...
