Panasonic KX-TGP500 - Mounting and Installation

Useful Information
51
Document Version 2010-08
Belt clip Wall mounting
Charger
1
Drive the screws (not supplied) into the wall.
2 Mount the charger (A), then slide it down (B)
and to the right (C) until it is secure.
Note:
L Make sure that the wall is strong enough to
support the weight of the unit.
■ To attach ■ To remove
Hooks
25 mm
Screws
A
B
C
Longer than
20 mm
Space
(2 mm)
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299