Panasonic KX-TGP600G - Page 51

Program Keys
Program keys are divided into 3 pages. You can switch among the pages with the /
[NEXT PAGE] key.
The initial settings are as follows:
• Page 1
– : Line Information (Registered line and Call information)
: Incoming Log
: Voice Message
: Forward/Do Not Disturb
• Page2–3
– : Not set
Note
• The settings of the Program Keys on page 1 cannot be changed from the phone.
• The settings of the Program Keys on pages 2 and 3 can be changed from the
phone. For details, see 2.4.9 Program Keys (KX-TPA68), page 69 and
8.1.4 Changing the Function Keys/Program Keys, page 121.
Desk Phone Status Information
Base unit number (when registered to multiple base
units)
*1
Registration number of handset/desk phone
*1
Program Keys Page
You can tell which page of the Program Keys is displayed by the position of the orange
mark.
Left: Page 1, Center: Page 2, Right: Page 3
Soft Keys
For details, see 2.4.4 Soft Keys (KX-TPA68), page 55.
*1
Not displayed when connecting to a base unit other than the KX-TGP600.
Note
• The display periodically refreshes itself to maintain optimal performance. When this
happens, the display may momentarily flicker.
2.4.2 Display (KX-TPA68)
51