Panasonic KX-TGP600G - Page 78

[ ]/[ ]: "Incoming Log"
OK
*1
KX-TPA68
[ ]/[ ]/[ ]/[ ]: Select an item from "Incoming Log"
*2
OK
*1
If "Missed Calls" is not displayed on the LCD in standby mode, this step can be
skipped.
When connected to a base unit other than the KX-TGP600, since "Incoming Log" is
not displayed, select from "Missed Call"/"Answered Call".
*2
Display the all sort of incoming call log on the incoming log list.
：Missed Call
：Answered Call
Note
• For details about the other operations, see Screen Transition Diagram, page 65.
Displaying the Outgoing Call Log
[In standby mode]
1.
/
*1
/ .
*1
KX-TPA60/KX-TPA65:
You can also press [
].
Note
• For details about the other operations, see Screen Transition Diagram, page 65.
Making a call using the Incoming/Outgoing Call Log
See 3.3.4 Using the Incoming/Outgoing Call Log, page 88.
Storing an item using the Incoming/Outgoing Call Log
See Storing an Item Using the Incoming or Outgoing Call Log, page 109.
Deleting the Incoming Call Log
[When the Incoming Call Log is displayed]
1. [
]/[ ]/[ ]
*1
/[ ]
*1
: Select the desired item. /
MENU
/
2. [ ]/[ ]: "Delete"
*2
OK
3. [ ]/[ ]: "Yes"
OK
To delete other items, go back to Step 1.
*1
KX-TPA68 only.
*2
You can select "Delete All" instead to delete all items.
2.6 Incoming/Outgoing Call Log
78