–KX-TPA65/KX-TPA68: Off-hook
Note
• When receiving an intercom call, the Handset Name is displayed on the LCD.
To answer an incoming call on a specific line (when connected to the KX-TGP600
only)
1.
/[LINE]: Display the line keys.
2. Press the dial key or [ ]/[ ] to select the Line number.
You can also answer a call using the following features:
–Any Key Answer
*1
–Quick Answer
*1
–Auto Answer
For details about setting these features, see Answer Option, page 150.
*1
KX-TPA60 only.
Note
• Line keys with incoming calls will be flashing green rapidly.
• If "Quick Answer"
*1
is set to "On" and a brief power failure occurs while the handset is
receiving a call on the charger, the following may occur:
–If "Talk On Charger" is set to "Off" (default), the call may be disconnected after
being answered.
–If "Talk On Charger" is set to "On", the call may be answered automatically. In this
case, please note that privacy rights may be violated or sensitive information may
be transmitted to unauthorized parties.
*1 KX-TPA60 only.
• You can select the ringer pattern for each type of incoming call. For details, see
Incoming Option, page 148.
Rejecting an incoming call
You can reject an incoming call from your handset/desk phone.
1. While an incoming call is ringing, press /
/
2. The call will be rejected, and the handset/desk phone will return to standby mode.
Note
• Calls from specific numbers can be automatically rejected. For details, see
8.1.8 Incoming Call Barring (Caller ID service users only), page 125.
4.2 Answering Calls
93
To Next Page
Loading...
