For assistance, please call: 1-800-211-PANA(7262)
11
Basic Operation
Answering Calls
While a call is being received, the unit rings and the ringer indicator
flashes. You can answer it by simply lifting the handset.
Using the speakerphone
1
Press (SP-PHONE/HEADSET).
≥The indicator lights.
2
Talk into the MIC
(microphone).
3
To hang up, press
(SP-PHONE/HEADSET).
≥The indicator light goes out.
≥When the ringer volume is set to OFF (p. 8), the unit will not ring.
≥The Ringer indicator will flash when
≥—a telephone number is dialed in PULSE mode, or
≥—someone picks up or hangs up another phone connected to the same phone
line.
≥This is normal.
To put a call on hold
Press (HOLD).
≥The SP-PHONE/HEADSET indicator light flashes.
≥If using the handset, you can place it on the cradle.
To release the hold
If the handset is on the cradle, lift the handset.
If the handset is off the cradle, press (HOLD).
If using the speakerphone, press (SP-PHONE/HEADSET).
≥If another phone is connected on the same line, you can also release the hold by
lifting its handset.
To Next Page
Loading...
