For assistance, please call: 1-800-211-PANA(7262)
Advanced Operation
19
“
Please write down your PIN code. If you forget your PIN code, call
our customer call center at 1-800-211-PANA(7262).
PIN Code
A 4-digit PIN Code (Personal Identification Number) prevents
unauthorized persons from using your unit. The PIN Code is required for
the dial lock and call restriction to be set or canceled. The factory preset
PIN code is “1111”.
Make sure that a call is not put on hold.
1
Press (PROGRAM).
≥The MUTE indicator flashes.
2
Press (MUTE).
3
Press (5).
4
Enter the current PIN code.
5
Press (PROGRAM).
≥If a correct PIN code is entered, a beep will sound.
≥If a wrong PIN code is entered, 3 beeps will sound. Enter the correct PIN
code and press (PROGRAM).
≥To return to the standby mode, lift the handset and hang up.
6
Enter a new PIN code using a 4-digit number.
7
Press (PROGRAM).
≥A long beep sounds.
≥The MUTE indicator light goes out.
≥The unit will return to the standby mode.
To Next Page
Loading...
