Panasonic KX-TS105W - Dialing Mode; Ringer Volume

8
Dialing Mode
You can select the dialing mode by programming. If you have touch tone
service, set to “Tone”. If rotary or pulse service is used, set to “Pulse”.
Your phone comes from the factory set to “Tone”.
Make sure that a call is not put on hold.
1
Press (PROGRAM).
≥The MUTE indicator flashes.
2
Press (MUTE).
3
Press (3).
4
To select “Pulse”, press (2).
or
To select “Tone”, press (1).
5
Press (PROGRAM).
≥A long beep sounds.
≥The MUTE indicator light goes out.
≥The unit will return to the standby mode.
“ Settings
RINGER Selector:
Set to HIGH, LOW or
OFF.
≥When set to OFF, the
unit will not ring.
HIGH
RINGER
OFF
LOW
Ringer Volume
You can select the ringer volume to HIGH, LOW or OFF. Your phone
comes from the factory set to HIGH.
(PROGRAM)
(MUTE) and Indicator
PQQX13158YA-BM0205.3.290:27PMページ8