For assistance, please call: 1-800-211-PANA(7262)
7
Preparation
“
Programming Summary
You can program the following functions. See the corresponding pages
for function details.
Make sure that a call is not put on hold.
Press (MUTE).
Press (PROGRAM) to store the setting.
Press (PROGRAM).
≥To set the call restriction, press (1). (page 21)
≥To change the flash time, press (2). (page 18)
≥To select the dialing mode, press (3). (page 8)
≥To change the PIN code for the dial lock and call restriction,
press (5). (page 19)
≥You can exit the programming mode any time by pressing (PROGRAM).
≥If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
PQQX13158YA-BM0205.3.290:27PMページ7
To Next Page
Loading...
